Know the brick
Light-coloured clay bricks can develop vanadium or iron staining if they are cleaned with the wrong acid. Dark bricks, face blocks and split-face blocks each have their own needs. The brick maker's cleaning recommendations are the starting point for every job.
Check the mortar has cured
Fresh mortar is soft. Cleaning too soon can wash it out of the joints, while waiting too long lets smears harden. As a guide, clean from about 14 days and ideally before 28 days after the brickwork is finished.
Insist on a test panel
A small area cleaned first shows whether the method and product suit your brick, and it sets the standard for the rest of the job. A contractor who suggests one is a good sign.
Pre-wet and protect
Soaking the wall before any cleaner goes on stops the brick drawing the cleaner (and the dissolved mortar) deep into its face. Windows, aluminium frames, glass, sills and plants should be protected before work starts.
Watch the pressure
High pressure held too close erodes mortar joints and can scar the brick face. Detergents should go on at low pressure, and the wash pressure and nozzle should suit the surface.
Rinse thoroughly
Cleaner left to dry on the wall can leave new marks. Every part of the wall should be rinsed from the top down until the water runs clear.
Think about the runoff
Cleaning water carries mortar, cleaner and dirt. It should be managed so it does not end up in gardens, gutters or stormwater drains.
Need it done properly?
Call A1 High Pressure Cleaning on 0406 060 409 or request a free quote.
