Bricks/Block Cleaning Services
The environment poses a threat to all housing, commercial, and rental buildings. Snow, humidity, sun, rain, and the unwanted attention of birds and other creatures, to name a few. When organic contaminants are factored in, it’s easy to understand why your home might benefit from the expertise of a professional pressure cleaning company.
Also, people often overlook the need to pressure wash new masonry during construction. Cleaning out the extra mortar from blocks or bricks of the newly constructed building will enhance its beauty. On the contrary, improper maintenance and cleaning can shorten the lifespan of the building and aids future damages too.
Masonry is well-known for being a long-lasting and minimal care building material, but it requires periodic cleaning. Understanding how to cleanse exterior and interior brick helps ensure that your brick lasts as long as possible while also looking its best. Because high water pressures used for cleaning might harm concrete masonry blocks, our Think Brick accredited personnel always take extra care not to destroy blocks or masonry while using pressure washing devices.
Therefore, hiring professional bricks or block cleaning services providers is advisable to perform such tasks. Read more to get to know a few tips while hiring a professional to do the job for you.
- Only when the mortar is cured then begin the cleaning process. It is recommended to start the brick cleaning process after 14 or 28 days of completion of construction. If you start the process early, joint damage might occur as the mortar is not adequately cured and might fall out while washing. However, if you take longer than 28 days to get it cleaned, it will be more challenging to clean as grout smears get more complex after a certain period.
- Perform a test on a small spot first before performing the cleaning process. If they insist on conducting a test spot first, you’re dealing with a skilled pressure washer. This is a crucial stage because it will reveal any potential problems before the project starts. The test panel will set the job standard.
- When cleaning brick, block, or stone, never sandblast or use muriatic acid; these methods will harm the surfaces. Sandblasting the surface will etch the brick and mortar joints, potentially exposing the masonry to weather-related degradation. The same would be true when muriatic acid is used. This can etch, bleach, and stain the stonework, resulting in new metallic stains.
- Detergents should be applied with low-pressure washing — your experienced pressure cleaning contractor will apply the cleansing detergent to the surface with low water pressure. There will be no stains on the brick, block, or stone as a result of this procedure.
- Rinse completely — it’s critical to remove all cleaning chemicals by rinsing thoroughly. If the detergents are not properly cleaned, they can leave marks if they are allowed to dry.
Your pressure washing expert is the ideal person to guide you through new masonry cleaning procedures. Please contact your nearest Pressure Washing service provider for more information about new masonry cleaning.